Next, you must remove the four screws securing the exhausted fuser unit into place, and then remove the exhausted component by sliding it towards you. Now, you must unplug the left fuser connectors, and then unplug the right fuser connector. Once you have removed the fuser cable cover, you must release the two tabs of the duplexer inlet guide, and then remove the inlet guide by sliding it towards the rear side of the main unit. After that, you must remove the I/O cover, and then remove the fuser cable cover. In the next step of the replacement procedure, you must remove the back cover by releasing its tabs, and then release the tabs of the I/O cover. Now, you must remove the two screws, and then close the face-up delivery door. After that, you must open the face-up delivery door, and then release its stoppers. You must start the replacement procedure by switching the HP LaserJet 2430 off. Finally, you must unpack the new control panel, and then install it by executing the current procedure in reverse order.

Once you have unplugged the connector, you must remove the two screws securing the control panel to the main printer frame, and then remove the control panel. Now, you must remove the front right cover by releasing its tabs, and then unplug the control panel connector. After that, you must detach the top cover by removing the four fixing screws, and then remove the two screws that secure the front right cover. Next, you must remove the left cover by releasing its tabs, and then detach the top right cover by removing its fixing screw.

Once you have removed the I/O cover, you must remove the two fixing screws of the left cover, and then open the toner cartridge door. In the next step of the replacement procedure, you must remove the rear cover, and then remove the I/O cover by releasing its tabs. Now, you must remove the two fixing screws, and then close the face-up delivery door. After that, you must remove the right cover by sliding it towards the rear side of the main unit, and then open the face-up delivery door, and then disengage the two stoppers by pushing the door down. Initially, you must switch the HP LaserJet 2430 off, and then unplug the power cord.

Hp 2430 printer drivers